欢迎访问APLAS！

Position type:

This is a permanent, full-time position, based in Ottawa, Canada.

Job summary:

We are looking for an experienced and motivated Process Engineer to join our process engineering team for project and innovative technology development.

Responsibilities

• Work with project team or clients to scope out projects, establish project objectives and coordinate/resolve design issues
• Perform process design & detail engineering tasks, including process simulations, design calculations, equipment sizing & selection, and process optimization etc.
• Deliver various engineering Drawings & Documents, including PFD, Heat & Material Balances, P&ID, Process Datasheets, Process Design Criteria, Equipment/Instrument Datasheets and Specifications, Control Philosophies and Detailed Control Logics, HAZOP Studies & Reports, and Operation & Maintenance Manuals etc.
• Interface with other disciplines, clients and vendors by providing and integrating necessary engineering design inputs/outputs
• Prepare and issue RFQ’s, evaluate vendor’s quotations and clarifications, and conduct technical bid analysis
• Participate in the process startup and commissioning, and be responsible for starting up, tuning specified equipment or systems, and turning over to the operations
• Supporting the management of operation using statistical process control tools and methodologies to analyze operating procedures, process data trends, and equipment unit operation functions for process troubleshooting optimization
• Up to 15% domestic and international travel

Qualifications

• Minimum of a Bachelor’s Degree in Chemical or Environmental Engineering
• Minimum 5 years of engineering experience in both process design and operational environment with a preference for experience in petrochemical or Waste-to-Energy industries
• Excellent written and communication skills, fluent in written and spoken English 2
• Able to execute assigned process tasks within budget and schedule
• Self-motivated and team player
• Experience in process control and optimization is considered an asset

HOW TO APPLY:

If you’re interested, please send the following documents in your application to HR@aplas.ca

• Your resume
• A cover letter identifying your area of expertise.
• Other supporting documents if applicable.

We thank you for your interest. Only those selected for further screening or an interview will be contacted.

Position type:

This is a permanent, full-time position, based in Ottawa, Canada.

Job summary:

We are recruiting some imaginative and dynamic individuals for our R&D Department. The candidates should have a Ph.D in thermal engineering, chemical engineering or other related disciplines, and have demonstrated research experiences in R&D work.

Responsibilities

1. Working in cooperation with the Engineering Department, the research associate will:

• Develop novel plasma technologies with potential applications in industries, especially in the fields of gasification processes, fly ash vitrification, hazardous waste treatment, and additive manufacturing.
• Design and test new torches in the lab, providing fundamental understanding of phenomena leading to the improvement of plasma technologies, optimizing the design by constructing robust models for the plasma torches.
• Convey new plasma torches to the commercial stage. And join the commissioning trials of plasma torches’ applications in the fields of gasification processes, fly ash vitrification, hazardous waste treatment, and additive manufacturing.
• Stay current with scientific and technical advances of plasma technologies.
• Review literature to develop new concepts to improve plasma technologies and broaden their applications that have potential commercial value.
• Construct process models and perform process simulations for optimizing plasma related processes.
• onstruct CFD models for optimizing the core reactors or units in the plasma related processes.
• Write technical reports and scientific papers. Participate in international conferences to present our achievements and share our latest activities.

Experience and Qualifications

1. Ph.D in thermal engineering, chemical engineering, or other related disciplines. Must possess extensive knowledge of the fundamental principles, theories, practices, andestablished methodology of engineering, chemistry, plasma physics, and mathematics.
2. Must possess practical experiences in at least four of the following fields:
   • Plasma torches development
   • Additive manufacturing
   • Powder metallurgy
   • Gasification of solid fuels
   • Plasma gasification
   • Fly ash treatment
   • Hazardous waste disposal
   • Blue gas clean-up
   • Syngas cleaning
   • Coal chemical industry
   • Waste water treatment
   • Synthesis gas chemistry

3. 5+ years professional experience in the related fields that are listed above.
4. Evidence of previous participation in collaborative, interdisciplinary research, and an awareness of the barriers faced by researchers in applying technology to their research fields.
5. Proven success in the team-oriented environment. Demonstrate an open-minded approach to new directions with the ability to carry out goal driven technological development projects, whilst maintain an excellent level of support to co-workers.
6. Skills in using common process simulation tools for process optimization.
7. Proficiency with CFD simulation strongly preferred.
8. Strong experimental abilities in the lab preferred.
9. A keen interest in research.
10. Good academic records and proven ability of scientific writing.
11. Self-starter that can carry out tasks with minimal oversight.
12. Strong communication skills and excellent presentation skills; ability to explain data and results clearly and communicate effectively.
13. Excellent verbal and written communication skills in English.

HOW TO APPLY:

If you’re interested, please send the following documents in your application to HR@aplas.ca

• Your resume
• A cover letter identifying your area of expertise.
• Other supporting documents if applicable.

We thank you for your interest. Only those selected for further screening or an interview will be contacted.

Position type:

This is a permanent, full-time position, based in Ottawa, Canada.

Job summary:

The role primarily involves Products Development and Design to support Production and R & D Activities. The position requires the successful candidate to have a university degree in Materials or Mechanical Engineering and ten (10) years of directly related work experience with a minimum of five (5) years of performing products design material selection and analysis (metal and non-metal). Membership in the provincial association for professional engineers is required. The position also requires knowledge of varies material properties, as well as an understanding and knowledge of engineering theories, principles and practices, industry codes and standards. The successful applicant will also possess effective communication and problem solving skills, strategic and analytical thinking, ability to use educated and intuitive judgement, ability to manage projects.

Responsibilities

• Develop, review and release product documentation for parts and assemblies consistent with documentation guidelines including the material selection, advanced analysis/calculations and designs.
• Work closely with multiple product development groups throughout the product development process (e.g. Project Management, Systems Engineering, Hardware verification and validation, Manufacturing, Process, Controls and Electrical Engineering).
• Provide technical support to released products to improve manufacturing, field reliability and/or product cost.
• Improve product designs with an emphasis on material selections, product cost, product reliability and design for manufacturability.
• Help the team meet and/or exceed project and design goals, including performance, schedules, cost and quality as established in the project plan.
• Candidate must be proactive, results-oriented, self-motivated and willing to be part of a team working in collaboration with a group engineers and scientists.
• Candidate must have strong organizational skills and excellent written and verbal communication skills.
• Understand existing drawings and implement revisions, ability to discuss basic physics/science concepts is an asset.
• Checking of drawings for conformity as per the part/assemblies.
• Develop plans, drawings, diagrams and models in accordance with effective specifications and techniques.
• Study various work documents (e.g. sketches, data, specification sheets, engineering calculations).
• Participate in developing specification sheets and estimating materials.
• Prototype development of parts either in-house / vendor development to the check the conformity of the design & subsequent checking of its functionality.
• Other duties as assigned.

Qualifications

• University degree in Mechanical or Material engineering is an asset
• Must be proficient with FEA Analytical tools
• Familiar with Solidworks and AutoCad
• Solid understanding of fits & tolerances/GD&T
• Minimum 10 years of experience in a similar role
• Excellent knowledge in MS Word and MS Excel to prepare process instructions and procedures

Skills Required

• University degree in Mechanical or Material engineering is an asset
• Have excellent knowledge on material properties (metal and non-metal), solid mechanics, static structural analysis, non-linear structural analysis, thermal analysis and material selection/application.
• Have good knowledge of numerical methods of solving more complex solutions, FEA, FMEA in failure modes and criteria
• Develop and design mechanical component parts and assemblies for integration into future and current products.
• Good knowledge in fluid mechanics and able to apply standard mechanical engineering calculations to systems, various seal materials and compatibility with various fluids.
• Have good knowledge and execution AutoCAD/SolidWorks and the ability to create drawing models and layouts for customer review.
• Design and deliver a complete work package including CAD modeling, detailed GD&T drawings, tolerance analysis and Bill of Material creation.
• Assist or lead the build of prototype assemblies to test functionality, analyze the ease of assembly, troubleshoot as necessary and summarize results.
• Competent utilizing Windows, Word Processing, Excel.
• Understanding of chemical process, P&ID, process and electrical controls.
• Collaborate with engineering and research scientists to develop theoretical concepts into functional prototypes.

Required experience:

• University degree in Mechanical or Material engineering is an asset
• Mechanical/Material Engineering Skills: 5 years
• Mechanical/Material Analytical: 5 years
• Solidworks and AutoCad: 3 years

HOW TO APPLY:

If you’re interested, please send the following documents in your application to HR@aplas.ca

• Your resume
• A cover letter identifying your area of expertise.
• Other supporting documents if applicable.

We thank you for your interest. Only those selected for further screening or an interview will be contacted.

Position type:

This is a permanent, full-time position, based in Ottawa, Canada.

Job summary:

The role primarily involves working with Solidworks to develop 3D Mechanical Drawings required to support Production and R & D Activities. Creating P&ID by AutoCad.

Responsibilities

• Help the senior engineers in creating detail drawings
• Understand existing drawings and implement revisions
• Understand Chemical Process and Creating Process Flow Diagram(PFD) and Creating P&ID
• Checking of drawings for conformity as per the part/assemblies.
• Develop plans, drawings, diagrams, and models in accordance with effective specifications and techniques
• Study various work documents (e.g. sketches, data, specification sheets, engineering calculations)
• Participate in developing specification sheets and estimating materials
• Prototype development of parts either in-house / vendor development to the check the conformity of the design & subsequent checking of its functionality
• Other duties as assigned

Qualifications

• University degree in Mechanical or Material engineering is an asset
• University degree in Mechanical engineering is an asset
• Must be proficient with Solidworks and AutoCad
• Solid understanding of fits & tolerances
• Minimum 3-6 years of experience in a similar role
• Excellent knowledge in MS Word and MS Excel to prepare process instructions and procedures

Skills Required

• Mechanical Designing and Drafting using Solidworks (3D & 2D)
• Mechanical Designing and Drafting using AutoCad (2D)
• GD&T
• PFD
• P&ID
• Piping Layout
• Material Selection

Required experience:

• Mechanical Skills: 3 years
• Mechanical Design: 3 years
• Mechanical Engineering: 3 years
• Solidworks and AutoCad: 3 years

HOW TO APPLY:

If you’re interested, please send the following documents in your application to HR@aplas.ca

• Your resume
• A cover letter identifying your area of expertise.
• Other supporting documents if applicable.

We thank you for your interest. Only those selected for further screening or an interview will be contacted.

Position type:

This is a permanent, full-time position, based in Ottawa, Canada.

Job summary:

We are looking for an experienced and motivated Electrical Engineer to join our company for project and innovative technology development.

Responsibilities

• Work with process engineer in developing conceptual and/or detail engineering of power supply systems
• Assist project engineer/leader in defining and monitoring of work scopes, deliverables, schedules, and budget
• Provide detail electrical engineering design and specifications for AC to DC conversion, low and high voltages systems, power distribution, grounding, fire alarm, lighting etc.
• Create electrical drawings, including schematics, wiring diagrams, and electrical equipment layout etc.
• Select electrical and other system components – contactors, circuit breakers, inverters, transformers, sensors, fire suppression system, HVAC, etc.
• Review vendor electrical drawings and power supply design packages
• Supervise electricians for construction
• Perform unit testing to ensure equipment and power supply comply with industry and regulatory requirements
• Coordinate with I&C design and other disciplines
• Up to 15% domestic and international travel

Qualifications

• Must have post-secondary education equivalent to a university degree in Electrical Engineering. M.Eng. is an asset
• Registered or eligible for registration with the Professional Engineers of Ontario (PEO)
• 10+ years of electrical engineering and design experience, including the design in build construction and industrial facilities
• Must be proficient in MS Office Applications and CAD software, including AutoCAD
• Must have an advanced understanding of quality standards relative to electrical design and planning, engineering fundamentals and principles
• Working knowledge and understanding of all relevant building and electrical safety codes
• Knowledge of power systems up to 700VDC, 600VAC, 10KW to 300kW (typical) and higher power systems
• Knowledge of grounding, power distribution, switchgear, MCC, lighting, and fire alarm systems
• Excellent analytical and problem-solving skills
• Well-developed communication, planning, and work organization skills
• Ability to work in an integrated team environment, and to effectively interface with employees at all levels, and external customers
• Demonstrated ability to be flexible and adaptable and work under tight schedules in a fast-paced environment
• Excellent written and communication skills, fluent in written and spoken English
• PLC arrangements, I/O list. PLC programing and HMI programming capability is an asset

HOW TO APPLY:

If you’re interested, please send the following documents in your application to HR@aplas.ca

• Your resume
• A cover letter identifying your area of expertise.
• Other supporting documents if applicable.

We thank you for your interest. Only those selected for further screening or an interview will be contacted.

If you’re interested, please send the following documents in your application to HR@aplas.ca

• Your resume
• A cover letter identifying your area of expertise.
• Other supporting documents if applicable.

We thank you for your interest. Only those selected for further screening or an interview will be contacted.

If you’re interested, please send the following documents in your application to HR@aplas.ca

• Your resume
• A cover letter identifying your area of expertise.
• Other supporting documents if applicable.

We thank you for your interest. Only those selected for further screening or an interview will be contacted.